How to connect Novabot to your APP (v1.2.29)

Step 1: connect Charging Pile to your account

1. Open the Novabot application and select "Add Charging Pile".
2. Ensure your device's Bluetooth is turned on, then scan the QR code on the charging pile to connect.                                                                                                                                                                                                                       
3. After successfully connecting, input your Wi-Fi credentials.(if you failed at this step ,please make sure the wifi you connected is 2.4gHz and reconnect the power of station to try again.)
4. The signal screen will confirm if your Wi-Fi signal strength and GPS satellite connections meet the requirements.(it may take long to 10s to have final result).If they do not meet the requirements at last, you need to adjust your station place.Once the Wi-Fi signal and GPS numbers are verified.(If you move the Antenna or charging pile after this, you will need to repeat this operation.)                                                                                                                               

Step 2: Connect Novabot to your account

1. In the application, choose "Add Novabot". Ensure your device's Bluetooth is on.                                  
2. Scan the barcode on your Novabot                                                                                                        
3. Turn on the bottom of the NOVABOT
4. Place Novabot down and Type in pin code with arrows( default pin code is 0001. you will need to type in this pin code to clear any error message displayed in screen of Novabot)                        
5. Press Next to connect Novabot to your APP. (if you fail at this step,please check if ssid or password of wifi have any special characters ,like blank space)                                                     
6. Assign a unique name for your Novabot.                       
7. Once connected, your Novabot may appear as offline for a brief period. This is normal and allows time for system initialization. (it may take long to 3mins)