How to install NOVABOT

1. Assemble the bracket set.
2. Open the case of the charging station.Install the GNSS antenna and extension
   cord (install according to the actual needs of the family).
3. Secure the extension cord to the bracket with velcro.
4. Insert the antenna vertically into the ground,avoiding slopes, pits, and metal ground. When
   installing, the angle with the ground cannot be greater than 10°.
5. Align the charging station wire notch (a) with the groove (b).

.Charging station:

1. To keep a good charge, please install it on a flat lawn. Avoid slopes and potholes, and avoid the metal ground.

2. For a good network signal, it needs to be installed close to the home Wi-Fi signal.

3. There should be no obstacles and sprinklers within 2 meters of the charging station. If there is long grass, please clean it first.

4. If security functions are required, installing the charging station within a radius of 3.5m is recommended. You can ignore this information if you do not need security protection capabilities.

5. When installing the charging station, keep that facing the grass and perpendicular to the border of the lawn.

6.For charging safety, it is recommended to install the power supply on the wall at least 30 cm away
from the ground, and do not wrap it to avoid overheating.(only fix the charging base after confirming both wifi and gps signal is good in APP)

7.Connect the power supply.